HBTS60 Diesel Engine Concrete Pump
HBTS60 diesel engine powered concrete is an engineering machinery equipment designed for complex construction scenarios without power grid power supply. The theoretical conveying capacity is 60m³/h and the maximum conveying pressure is 16-22MPa. The equipment adopts National III/National IV standard diesel engine, which is suitable for high-difficulty projects such as super high-rise buildings, cross-sea bridges, and mine tunnels. It has three core advantages: intelligent control, ultra-long life and extreme environmental adaptability.
Capacity：60m³/h
Warranty: 18 months
Diesel Engine Power: 129Kw
Voltage: 220v/380v/415v/440v/480v(50Hz/60Hz)
Product Structure
The precise structure of HBTS60 diesel engine-powered concrete pump:
Power system
Diesel engine: Equipped with Weichai WP10 series high-pressure common rail engine (rated power 199kW), meeting the National IV emission standards.
Hydraulic system: dual-pump dual-circuit design (main pump displacement 260ml/r), equipped with Rexroth A10VO series plunger pump
Cooling system: three independent cooling circuits (hydraulic oil/engine coolant/fuel)
Pumping system
Distribution valve: optimized S-tube valve (diameter 230mm), embedded with tungsten carbide alloy wear-resistant layer
Conveying cylinder: laser quenching cylinder body (Φ200×2100mm), surface hardness reaches HRC58-62
Hopper assembly: 1.2m³ volume + dual-axis hydraulic stirring, anti-segregation design
Intelligent control system
Main control unit: Siemens S7-1200 PLC + 10-inch industrial touch screen
Sensor network:
Pressure sensor (0-35MPa)
Temperature sensor (-40℃~150℃)
Displacement sensor (accuracy ±0.1mm)
Safety protection: five-level overload protection (mechanical/hydraulic/electrical/software/manual)
Working principle
The working process of HBTS60 diesel engine powered concrete pump is as follows:
Power transmission chain
Diesel engine → transfer case → hydraulic pump group → main cylinder → concrete push
Pumping cycle process
Suction: The main cylinder retracts to form negative pressure, and the concrete is sucked into the delivery cylinder. Vacuum monitoring system.
Push: The main cylinder extends, and the concrete enters the delivery pipe through the S valve. Pressure adaptive control.
Reversing: The hydraulic pilot valve automatically switches the direction of the oil circuit, and the buffer reversing technology.
Intelligent control mechanism
Constant power control: Automatically adjust the displacement according to the delivery pressure (0-100% stepless speed change).
Fault self-diagnosis: 32 fault code libraries, supporting real-time warning and historical tracing.
Remote interaction: Optional 4G module to achieve cloud data management.
Product Advantages
Excellent performance indicators
Vertical conveying height 350m, horizontal conveying distance 1800m, aggregate adaptability ≤50mm.
Ultra-long service life
Spectacle plate life: ≥100,000 cubic meters
Cutting ring life: ≥80,000 cubic meters
Hydraulic system: high-pressure filter (β≥1000) is used, and the oil cleanliness is maintained at NAS level 8
Intelligent construction management
Four operation modes:
Economic mode (fuel consumption is reduced by 15%)
Standard mode (balanced performance and energy consumption)
Strong mode (maximum pressure output)
Custom mode (free combination of parameters)
Construction data cloud storage: automatic generation of pouring log (time/volume/fault record)
Extreme environment adaptation
Working temperature: -25℃~50℃ (optional polar kit extended to -40℃)
Protection level:
Electrical system IP67
Hydraulic system dustproof and waterproof design
Multiple application scenarios
Super high-rise building: Shanghai Tower-level core tube pouring (pumping height 550m+)
Cross-sea project: Hong Kong-Zhuhai-Macao Bridge-style ultra-long distance transportation
Mining project: underground tunnel lining (explosion-proof configuration)
Polar construction: construction of oil and gas facilities within the Arctic Circle
Product Parameters
| Model | HBTS60 |
| Max. Theoretic capacity(m³/h) | 60/46 |
| Max, Theoretic pressure(Mpa) | 13/6.3 |
| Diesel engine power(kw) | 129 |
| Maximum vertical distance(mm) | 200 |
| Maximum horizontal distance(mm) | 500 |
| Disribution valve type | S valve |
| Hydraulic oil circuit type | Open Circuit |
| Specification of concrete cylinder(mm) | Ø200×1800 |
| Specification of main oil cylinder(mm) | Ø140×1800 |
| Oil tank capacity(L) | 420 |
| Hopper capacity(L) | 600 |
| Max. Aggregate diameter(mm) | Slick scree: 50 |
| Scree: 40 | |
| Dimension (LxWxH)(mm) | 5800×2000×1750 |
| Overall weight(kg) | 5800 |
| Pulling speed(km/h) | ≤8 |
