JN500 Planetary Concrete Mixer
This JN500 planetary concrete mixer overview helps buyers review the 800 L feed-capacity and 500 L discharge-capacity model for precast concrete, blocks, pavers, laboratory trials and compact batching-plant use. The existing parameter table lists ?60 mm aggregate size, 45.86 r/min autorotation speed, 12.74 r/min revolution speed, 2?2 mixing blades, 2?1 side scraper blades, 18.5 kW motor power and about 3500 kg machine weight. These figures are useful for model comparison, but the final quotation should confirm the current technical sheet, voltage, control scope, discharge arrangement and installation drawing. For nearby larger choices, compare this page with the vertical-shaft planetary concrete mixer category.
Feed capacity reference: 800 L
Discharge capacity reference: 500 L
Motor power reference: 18.5 kW
Supply options to confirm: 220/380/415/440/480 V; 50/60 Hz
JN500 Planetary Mixer Configuration Checks
Mixing system: confirm the feed capacity, discharge capacity, aggregate-size limit, autorotation speed, revolution speed, mixing-blade layout and side-scraper layout for the exact JN500 mixer being quoted.
Application fit: JN500 is usually reviewed for smaller batch volumes, precast components, blocks, pavers, test production and compact batching lines that need intensive pan mixing rather than very high single-batch volume.
Drive and control package: check the 18.5 kW motor reference, reducer configuration, control cabinet, safety interlocks, lubrication points and whether variable-frequency control or plant communication is included.
Installation fit: compare machine weight, foundation load, feeding height, discharge-gate position, maintenance access and downstream hopper or conveyor layout before confirming the order.
How to Review the JN500 Mixing Workflow
Review the JN500 workflow as a complete production cycle: material feeding, dry mixing if required, water and additive dosing, wet mixing, discharge and cleaning. Planetary motion helps material circulate through different paths inside the pan, but practical output depends on mix design, batching accuracy, moisture control, filling ratio, discharge time and operator routine. Ask for recommended mixing time and cleaning procedure for your concrete type before relying on theoretical capacity alone.
JN500 Planetary Mixer Selection Checklist
Batch requirement: confirm whether 500 L discharge capacity fits the required batch size and production rhythm.
Material limit: check aggregate size, aggregate grading, moisture range, additive dosing and whether the mix is dry-cast, wet concrete or specialty material.
Power and controls: confirm local voltage, frequency, motor protection, control cabinet scope and automation interface.
Wear parts: request blade, scraper, liner, seal and lubrication parts information, especially for abrasive aggregates.
Layout planning: confirm feeding method, discharge direction, maintenance clearance, foundation drawing and lifting access before shipment.
JN500 Planetary Concrete Mixer Reference Specifications
| Model | JN500 |
| Feed capacity reference (L) | 800 |
| Discharge capacity reference (L) | 500 |
| Aggregate size reference (mm) | ≤60 |
| Autorotation speed reference (r/min) | 45.86 |
| Revolution speed reference (r/min) | 12.74 |
| Mixing blade arrangement reference | 2×2 |
| Side scraper blade arrangement reference | 2×1 |
| Motor power reference (kW; configuration to confirm) | 18.5 |
| Machine weight reference (kg) | 3500 |
Parameter note: the existing table keeps the original JN500 model values for feed capacity, discharge capacity, aggregate-size limit, autorotation speed, revolution speed, blade arrangement, scraper arrangement, motor power and machine weight. Use these entries for model comparison only. Confirm the current technical sheet, voltage, discharge-gate design, control-system scope, foundation drawing and spare-parts list before ordering.
JN500 Planetary Concrete Mixer: Buyer Questions
When is the JN500 planetary concrete mixer a practical choice?
JN500 is commonly reviewed when buyers need a compact planetary pan mixer for smaller batch volumes, precast products, blocks, pavers, laboratory trials or batching lines where mixing uniformity is more important than very large single-batch output.
What capacity should buyers use when comparing JN500?
Use both figures together: the table lists 800 L feed capacity and 500 L discharge capacity. The real production rhythm also depends on mixing time, feeding method, discharge time, moisture control and downstream equipment.
Is 18.5 kW motor power enough to judge the mixer?
No. Motor power is only one reference point. Buyers should also check reducer configuration, blade layout, side scraper design, material density, control system, liner material and the recommended mixing time for the target concrete.
What should be confirmed before ordering a JN500 mixer?
Confirm voltage and frequency, discharge-gate type, control-cabinet scope, lubrication system, wearing parts, installation drawing, foundation load, spare-parts list, packing method and after-sales support for the destination site.
