HBTS40 Diesel Engine Concrete Pump
The HBTS40 is presented here as a diesel engine concrete pumping option. The existing specification table lists theoretical pumping output of 40 m³/h, maximum concrete pressure of 10 MPa and engine power of 66 kW. These are reference entries for quotation review. Do not extend them to larger output ranges or long-distance guarantees without a configuration sheet and assessment of your actual route.
Reference theoretical output: 40 m³/h
Warranty reference: 18 months; confirm terms
Reference diesel engine power: 66 kW
Auxiliary electrical requirements: confirm configuration
More Product Details
HBTS40 Configuration to Confirm
Drive: the existing table lists a 66 kW diesel engine. Confirm the engine make, model, starting arrangement and any auxiliary electrical requirements.
Pumping assembly: the table records an S valve, an open hydraulic circuit and a concrete cylinder specification of Ø160 × 1000 mm. Request the assembly drawing and parts list rather than assuming larger cylinder dimensions or strokes.
Capacities: the listed hopper capacity is 600 L and hydraulic oil tank capacity is 300 L. Confirm these entries on the model-specific data sheet.
Controls and auxiliaries: identify the actual lubrication, cooling and control configuration in the quotation. Automatic lubrication, remote monitoring, accumulator design and particular wear-part materials are not established by the reference table.
HBTS40 Concrete Supply and Pumping Process
Coordinate the supply of already mixed concrete to the receiving hopper, the agreed delivery line and the placing crew at the discharge point. The existing table identifies an S-valve hydraulic pumping configuration with diesel drive. Use the supplied documentation for the actual pumping assembly, starting arrangements and controls; this page is not an operating procedure. Request the manual and agreed commissioning and training scope before use.
HBTS40 Selection and Quotation Checklist
Engine package: confirm the engine specification, starting system, service requirements and any auxiliary power needs.
Site restrictions: review fuel supply, exhaust and ventilation arrangements, noise restrictions and maintenance access.
Output and route: request the output applicable to your concrete mix and complete pipeline, not an isolated maximum distance.
Delivery scope: identify the pipe, hose and coupling quantities and ratings, wear parts, documentation and agreed service responsibilities.
Drive comparison: compare the HBT40 electric pump where a suitable supply is available. See the diesel pump range for broader selection guidance. Diesel drive alone does not establish suitability for mines, tunnels or every off-grid project.
HBTS40 Reference Specifications
| Model | HBTS40 |
| Theoretical pumping output (m³/h) | 40 |
| Maximum concrete pumping pressure (MPa) | 10 |
| Diesel engine power (kW) | 66 |
| Vertical pumping distance (unit to confirm) | 120 |
| Horizontal pumping distance (unit to confirm) | 250 |
| Distribution valve type | S valve |
| Hydraulic circuit type | Open Circuit |
| Concrete cylinder specification (mm) | Ø160×1000 |
| Main hydraulic cylinder specification (mm) | Ø100×1000 |
| Hydraulic oil tank capacity (L) | 300 |
| Hopper capacity (L) | 600 |
| Aggregate size entries (mm; material types to confirm) | Slick scree: 40 |
| Scree: 30 | |
| Overall dimensions (L × W × H, mm) | 4500×1750×1600 |
| Overall weight (kg) | 3200 |
| Listed towing speed (km/h; conditions to confirm) | ≤8 |
Read before ordering: these are the existing published reference values, not a verified configuration sheet for your order. The original distance entries are 120 and 250 and were labelled “mm”; their units and test conditions require confirmation, so they have not been converted to metres. The original aggregate descriptions “Slick scree” and “Scree” are retained because their material definitions have not been verified. Ask for the permitted aggregate types, delivery-pipe specification and concrete conditions. Confirm the output available at the required pressure, complete pipeline route, dimensions, weight and towing arrangements in the signed quotation.
HBTS40 Diesel Concrete Pump: Buyer Questions
What output and pressure are listed for this model?
The existing table lists 40 m³/h theoretical pumping output, 10 MPa maximum concrete pressure and 66 kW engine power. Confirm these on the configuration sheet for your order and ask for the output available at the required pressure; they are not a guaranteed placing rate for every route.
Are the listed pumping distances guaranteed?
No. The original entries are 120 and 250, with an unverified “mm” label. Their units and test conditions require confirmation. Submit the full pipeline route, concrete mix, pipe diameter, bends, vertical rise and end-hose arrangement for review rather than relying on a distance figure alone.
Are the two aggregate sizes tied to confirmed material types?
Not yet. The table retains “Slick scree: 40” and “Scree: 30” as original entries under an aggregate size heading in millimetres. Ask for the exact material definitions, permitted aggregate size and concrete mix conditions for the supplied pump and delivery line.
What should be confirmed besides the diesel engine rating?
Confirm the engine make and model, starting system, fuel and service arrangements, and any auxiliary electrical requirements. Request the complete equipment and accessory list. The page retains an 18-month warranty reference; confirm its start date, coverage, exclusions, wear-parts treatment and service responsibilities in writing.
