HBT40 Electric Concrete Pump
The HBT40 is presented here as an electric concrete pumping option. The existing specification table lists theoretical pumping output of 40 m³/h, maximum concrete pressure of 10 MPa and motor power of 45 kW. Treat these as reference entries for quotation review, not a guarantee of site placing rate. Confirm the exact configuration and your full pipeline route before ordering.
Reference theoretical output: 40 m³/h
Warranty reference: 18 months; confirm terms
Reference motor power: 45 kW
Supply options to confirm: 220/380/415/440/480 V; 50/60 Hz
More Product Details
HBT40 Configuration to Confirm
Drive: the existing table lists a 45 kW electric motor. Confirm its nameplate, voltage, frequency, phase and starting requirements for the supplied configuration.
Pumping assembly: the table records an S valve, an open hydraulic circuit and a concrete cylinder specification of Ø160 × 1000 mm. Request the assembly drawing and parts list rather than assuming alternative cylinder sizes.
Capacities: the listed hopper capacity is 600 L and hydraulic oil tank capacity is 300 L. Confirm these entries on the model-specific data sheet.
Controls and accessories: identify the actual control functions, lubrication arrangement and delivery-line items in the quotation. Component brands, PLC functions, remote monitoring and pipeline ratings are not established by this reference table.
HBT40 Concrete Supply and Pumping Process
Coordinate the supply of already mixed concrete to the receiving hopper, the agreed delivery line and the placing crew at the discharge point. The existing table identifies an S-valve hydraulic pumping configuration; use the supplied model documentation for the actual assembly and controls. This page is not an operating procedure. Request the manual, commissioning and training scope before use, and do not treat theoretical pumping output as guaranteed continuous placement.
HBT40 Selection and Quotation Checklist
Site power: confirm the connection capacity and starting requirements, not just a voltage option.
Output and route: request the output available at the pressure required for your concrete mix, pipe diameter, bends and vertical rise.
Equipment scope: check the model designation, controls, wear parts, delivery accessories and documentation.
Access and service: review positioning, transport, maintenance access and agreed support responsibilities.
Drive comparison: compare the HBTS40 diesel pump where appropriate. See the electric pump range for broader selection guidance. No noise level, component brand, energy saving or remote-control feature should be assumed without model-specific evidence.
HBT40 Reference Specifications
| Model | HBT40 |
| Theoretical pumping output (m³/h) | 40 |
| Maximum concrete pumping pressure (MPa) | 10 |
| Electric motor power (kW) | 45 |
| Vertical pumping distance (unit to confirm) | 120 |
| Horizontal pumping distance (unit to confirm) | 250 |
| Distribution valve type | S valve |
| Hydraulic circuit type | Open Circuit |
| Concrete cylinder specification (mm) | Ø160×1000 |
| Main hydraulic cylinder specification (mm) | Ø100×1000 |
| Hydraulic oil tank capacity (L) | 300 |
| Hopper capacity (L) | 600 |
| Aggregate size entries (mm; material types to confirm) | Slick scree: 40 |
| Scree: 30 | |
| Overall dimensions (L × W × H, mm) | 4500×1750×1600 |
| Overall weight (kg) | 3200 |
| Listed towing speed (km/h; conditions to confirm) | ≤8 |
Read before ordering: these are the existing published reference values, not a verified configuration sheet for your order. The original distance entries are 120 and 250 and were labelled “mm”; their units and test conditions require confirmation, so they have not been converted to metres. The original aggregate descriptions “Slick scree” and “Scree” are retained because their material definitions have not been verified. Ask for the permitted aggregate types, delivery-pipe specification and concrete conditions. Confirm the output available at the required pressure, complete pipeline route, dimensions, weight and towing arrangements in the signed quotation.
HBT40 Electric Concrete Pump: Buyer Questions
Does 40 m³/h mean guaranteed site output?
No. The existing table lists 40 m³/h theoretical pumping output and 10 MPa maximum concrete pressure. Ask for the output available at your required operating pressure and concrete conditions; do not assume separate maximum figures can be achieved together.
Are the distance values confirmed in metres?
No. The original table entries are 120 and 250, with a “mm” label that has not been verified. Their units and test conditions need confirmation. Provide the complete route, including vertical rise, horizontal length, bends, pipe diameter and end hose, for a model-specific assessment.
How should the aggregate size entries be read?
The existing table records “Slick scree: 40” and “Scree: 30” under an aggregate size heading in millimetres. The material descriptions are unclear; do not assign a material type from these words alone. Confirm the permitted aggregate type and size, concrete mix requirements and matching delivery-pipe specification.
What electrical and warranty details should be confirmed?
Confirm the supplied motor rating, voltage, frequency, phase, starting requirements and available connection capacity. The page retains an 18-month warranty reference; request the written start date, coverage, exclusions, wear-parts treatment and service responsibilities. Include commissioning, training and accessory quantities in the quotation.
